GN Solids Control tiene grandes cantidades de zarandas operando por distintas regiones del mundo. Mas de 70 países se benefician de la exportación de maquinarias y equipos fabricados y diseñados por GN Solids Control. Centros de distribución en varios países ubicados en diferentes continentes proporcionan una gran facilidad para exportar y suministras a nuestros clientes, ayudando a que la locación no influya en lo absoluto. GN Solids Control cuenta con establecimientos en Australia, Latinoamérica, Rusia, América y el Medio Oriente. 
Las zarandas juegan un papel fundamental cuando hablamos de control de sólidos, trabajos de perforación y diferentes tipos de tratamiento en la industria petrolera. GN Solids Control aproximadamente vende alrededor de mas de 200 zarandas al año, considerándose una de las maquinarias mas populares en el mercado.
Las zarandas de GN Solids Control poseen distintas características que ayudan a distinguirlas con las de la competencia. Las zarandas presentan un marco compuesto alrededor pretensado que otorga facilidad a la hora de tener que cambiar las mallas y también se beneficia por darles mas durabilidad a las mismas. Las zarandas de GN Solids Control pueden ponerse en marcha utilizando un motor vibrador de la marca US Martin o Italy OLI y el panel de control funciona con SIEMENS o Schneider Component.
Las zarandas cuentan con una plataforma mecánica que permite ajustar el ángulo, proporcionando mas seguridad y confiabilidad a la hora de hacer ajustes mientras el sistema continúa trabajando con diferentes fluidos de perforación. La cama de la zaranda debajo de la malla esta hecha de acero inoxidable y anticorrosivo para garantizar larga duración a la maquinaria. Además, las zarandas cuentan con tecnología patentada, diseñadas con tamiz sellado para minimizar el paso de solidos finos y facilitar el mantenimiento.
Las zarandas también incluyen un sistema de bloqueo hecho de acero inoxidable fácil de usar, y una especie de muelle de goma para la vibración que hace mas seguro y menos ruidoso el proceso. GN Solids Control busca siempre maximizar la seguridad y durabilidad de las maquinarias, aplicando características tecnológicas e innovadoras.
GN service for refurbishment equipment
The existing Derrick shakers are to be re-used. It is currently proposed that shakers will be free issued to GN for refurbishment prior to incorporating in the works. Required refurbishment includes:
• Strip down
• Sand blast
• Reweld any cracked components
• Paint using approved zinc silicate primer and epoxy topcoat system
• Reassemble
• Fitment to shaker module skids
Should any new parts be required these will be reimbursed at actual cost plus 15%. Any welding of cracked sections will be a variation at the agreed rates in the Schedule of Prices. All other work – i.e. strip, paint reassemble is based on a lump sum.
GN may also offer quotation to offer a similarly designed shaker with the same performance characteristics which will accommodate the fitment on the client’s vibrator motors, junction box and shaker screens and all other replaceable parts.
Further detail is given in Section 11.1 of the Functional Design Specification.
Refurbishment of Degasser
The existing degassers require:
• Sandblast
• Wall thickness inspection
• Painting
• Vac pumps are to be cleaned, wire brushed, repainted
• Vac Pump to be fitted with new motors, see section 7.1, 11.2 of 051-RM-002
• Replacement and Fitment of Vac Pump Motor See section
GN to allow for the above as a lump sum. If any repair is required, this shall be notified to Company and a variation will be raised.
GN may also offer quotation to offer a similarly designed degasser with the same performance characteristics which will accommodate the fitment of the clients degasser pump and all other replaceable parts.
Level Sensors
Existing company supplied level sensors will be used.
GN scope is to install sensors and cables complete with plugs.
GN attend the 34th Beijing no-dig show
On October 10, 2016 to 12, explored the 34th international trenchless technology will be successfully held the national agriculture exhibition centre in Beijing, at the appointed time, from hundreds of relevant international and domestic famous enterprises, companies, experts, scholars and industry exhibition audience of thousands of people flock to arrive on time to attend this important event in the industry circles.
The conference by the international society for trenchless technology association and China geological host trenchless technology professional committee, GN Solids Control co., LTD. Keep to participate in the annual of the exhibition, and brings the latest models of 200 d small pile driving system and GNLW223 drilling fluid centrifuge products fair, on display in the three days of time, crown can display equipment by many customers home and abroad to visit, their operation parameters of exhibition equipment, processing materials and processing effects, etc. Ask one by one, after showing interest in champions league can products.Can at the same time, customers care more about the other solids control equipment, and have to leave their postcards, hope later have the opportunity to cooperate with crown can company to keep.
GN Solids Control co., LTD is one of the main production is given priority to with drilling mud drilling fluid solids control equipment, drilling waste pulp processing equipment, the company headquarters is located in the Beijing capital airport, 40 km (25 miles) of the chaobai river industrial zone, a consortium can crown company in the United States oil city of Houston, Moscow have the branch company, products exported to many countries in the world for many years, especially in domestic product quality are has a very high reputation in the international market.
Jet mud mixer
GN SOLIDS CONTROL co., LTD. Production of SLH series jet slurry device is used to configure or increase the total drilling fluid, the change of drilling fluid density, viscosity, water loss and so on, all need to drilling fluid material (bentonite, barite powder, etc.) and line camp of chemical additives (mixture) into circulation tank, if direct investment can cause drilling fluid material and chemical additive a large amount of precipitation or a reunion, cannot obtain the dispersion, uniform of the drilling fluid.
SLH series jet slurry device is used in oil drilling solid control system configuration using a device that can satisfy him 1500 meters to 6000 meters the deterioration of the drilling fluid solids control system and cultivating, slurry device consists of a 45 kw sand pump and a jetting mixing funnel connected with manifold valve installed on a base of. Safe and reliable performance, convenient movement.
GN SOLIDS CONTROL co., LTD. In line with the aim of “science and technology is the first productive force”, with more than scientific research units and institutions established strategic cooperative relations.For the company product technology content and product quality stand at home forefront provides a powerful guarantee.At the same time to the company’s deputy general manager and chief engineer Mr Macro cheung engaged in oil drilling solids control equipment and complete sets of system design and development more than ten years, has rich experience in design and development, can according to user requirements and the actual usage for design optimization of system solutions.
Other equipment: in addition to the sand silt all-in-one
Welcome to inquire SLH series jet slurry device.
Specializing in the production of SLH series jet slurry device manufacturers.
Brief introduction of GN vertical cutting dryer
Equipment description
GNCD930 vertical cuttings dryer is used for drilling waste management, to remove the particles below 3mm;The dryer can reduce the liquid content in cuttings ( WBM / OBM / SBM), to make the discharged cuttings comply with the requirement of environment protection; recover the valuable drilling mud and lower down the drilling cost.
During drilling, theoretically speaking, about 1-4 barrels drilling fluids can be recycled from each barrel of drilling cuttings removed by solids control equipment. Theoretically speaking, GN drilling cuttings dryer system consisting of Vertical cuttings Dryer could recycle about 1 barrel drilling fluids from 3 barrels drilling cuttings
structural compositions and working principle
The dryer is composed of frame assembly, filter unit, driving system, lubricating system, Inlet/outlet device etc
Filter unit
This is composed of screen basket, bell jar combination, rotor assembly etc. The screen basket gap can be chosen per jobsite requirement
Driving system
The power is from ex-proof motor. The motor drive the main pulley, the main pulley drive the gearbox housing via V belt, the gearbox drive the bell jar combination and screen basket assembly. Fix the gearbox input shaft, to make the gearbox output shaft speed little lower than gearbox housing speed, to drive the rotor assembly in a speed which is slower than screen basket assembly rotation speed
Lubricating system
This power unit body applies centralized lubrication system. The lubricating oil in the oil tank is pumped into power unit via the oil pump, from top to down flow back to oil tank via oil return pipe which connected with oil pan
inlet/outlet device
The device including material feeding hopper, liquid outlet, solids discharge etc
The feeding hopper is on top of upper shell, the material go into filter unit via feeding hopper, spread on screen basket inside wall evenly via distribution plate.The liquid outlet is connected with lower shell liquid outlet channel, to discharge the liquid from dryer.Solids discharge port is