GN CBM Drilling Mud System

1500HP land drilling rig usually match 2000bbls mud system. The mud system will have complete full 4 stages solids control equipment and with 5 steps separation process.

Equipment included in 1500 hp land drilling rig mud system:

1) First stage solids control – Shale shaker GNZS594E / GNZS703E linear motion, 3 each

2) The second & third stage solids control – Mud cleaner GNZJ594E-3S-16N / GNZJ703E-3S16N, 1 each

3) Vacuum degasser GNZCQ360 to remove gas from drilling mud before enters into mud cleaner desander / desilter cone.

4) The fourth stage solids control – Decanter centrifuge, 2 each

 One decanter centrifuge GNLW452S in middle speed for barite recovery.

 Another decanter centrifuge GNLW363 in high speed to separate the low gravity mud.

5) Jet mud mixing & shearing mixing system, with GN high efficiency centrifugal pump and shear pump for chemical shearing and mixing.

6) 7 each Mud tanks: shale shaker tank, decanter centrifuge tank, suction tank, mixing tank, shearing tank, storage tank 1 or 2 each

Above is the standard 2000bbls mud system for 1500 hp land drilling rigs. GN Solids Control can make customized mud system per user’s special requirements. If you need more information of other size land drilling rig mud system, you can visit GN website or send mail to vivi@gnsolidscontrol.com

Mud gun is usually matched with mud agitator, used to agitating tank corner where the mud agitator cannot work to, and to clean the tank coner. In some cases, Mud gun also used for small tanks no extra space for mud agitator.

GN Solids Control make 3 nozzle mud gun to cover the 360º tank corner. GN is a API certificated company, all its manufacturing per API standard.

GN 200GPM mud system is suitable to treat capacity between 100~200GPM. It can be used for water well drilling and CBM drilling rigs.

The 200GPM mud system for water well drilling and CBM drilling including below equipment, it is a 1-tank mud system:

1) Mud tank: 4000*2100*1350mm, 1 each

2) Mud cleaner :GNZJ753E-4N, 1 each

The mud cleaner mounted with double deck shale shaker. Above the shaker is a 4-desitler cone assembly.

3) Centrifugal pump: GNSB4x3-11J, (11kw), 2 each, 1 pump for mud mixing, 1 pump for feeding the desilter cone.

4) Mud gun: GNNJQ50-3G, 1 each

5) Mud hopper GNSLM25, 1 each, matched with the 11kw centrifugal pump, to mixing mud for the water well drilling rig.

6) Submersible slurry pump 80YZ50-20(7.5Kw), feeding for shale shaker from mud pit

It is compact design, the whole GN200 GPM mud system with total height no over than 3.5m. And the total width is 2.4m. No equipment need to be removed during shipment. It can be shipped as a complete set in most countries and areas.

GN Solids America is the first USA based Solids Control Company from China. Its headquarter located in U.S. Houston, in Oil Center City, Houston, Texas.

The solids control company GN Solids America with its own warehouse very near to Derrick and Kemtron. There are high quality decanter centrifuge, shale shaker and replacement shaker screen stock in Houston warehouse for fast delivery.

If you have interest, please contact GN or visit GN warehouse in Houston for more information of their solids control equipment.

GNLW363 centrifuge is widely choosed for dewatering unit. GNLW363 centrifuge, with Derrick DE-1000 centrifuge and Swaco 518 centrifuge, they are the most hot sale model worldwide.

GNLW363 dewatering centrifuge is with bowl size 14 inch. And with bowl length 50 inch. It is the most popular size centrifuge model.

Derrick and Swaco dewatering unit sometime put the centrifuge in the same container of the dewatering unit. While GN Solids Control recommend to put the centrifuge outside the dewatering unit, for easy maintenance and operation.