As
more and more authorities issued more and more strict rules on the envornment
protection, drilling
waste management
equipment gets more and more necessary at drilling rig
site, especially in oil and gas drilling rig website. As the drilling fluids
material various kind of chemicals, in case discharged directly. it will have
really bad pollution to the atmosphere.
GN Solids Control most recent design drilling waste management equipment drill
cuttings renforcement unit are welcomed in jobsite.
1) The drill down cuttings solidification unit may be used to treat drilling
cuttings released from the high G drying out shaker. When the cuttings through
solids control shale
shaker
, desander,
desilter treated by higher G drying shaker, the actual fluids will go to drying
out shaker catch tank for more treatment, the solids through high G drying
shaker can be treated by drill cuttings solidification unit.

2) The actual drill cuttings solidification device can be used to treat
drilling cuttings discharged from decanter centrifuge. The liquid phase is drilling
to be covered by further treatment, such as dewatering unit. while the solids
phase can be treated by drill down cuttings solidification unit.

3) The solids discharged through vertical
cuttings dryer
could be further treated by drill down cuttings
solidification unit. It may reduce the water content within the waste.
Many clients may question, what is the water content following the drillings
treated by drill down cuttings solidification unit? It can be hard to see what
the water content material is. As it is flexiable. It really is controlled by
the operators. If you want to the actual cuttings dryer, you include more
chemicals, if you do not require very dryer, you can slow up the quality of
chemical.
Top features of GN latest design drill down cuttings solidification unit
1) Small footprint with high effectiveness of GN latest style drill cuttings
solidification device.
2) Automatically control associated with GN latest design drill down cuttings
solidification unit.
3) All the screw conveyers associated with GN latest design drill down cuttings
solidification unit tend to be variable speed control.


ABOUT THE AUTHOR

gnadmin