Desander is the third phase solids control equipment.It is usually followed shale shaker and next it is desilter.
Desander usually combined with a underfluid shale shaker, hydrocylone parts (usually 10’’)
.
Underfluids shale shaker is option. Hydrocyclone parts can match to match 2 ~ 3. Cone material choose from 100% Polyurethane (PU), with longer using lift,and interchangeable with Derrick.
Flexable fast connection are available for user friendly assy.
Vacuum Degasser is one the important equipment for oil drilling mud system for separation the gas from drilling fluids to keep the balance of the mud.
GN have around 10 Vacuum degasser in stock for sale
GNCQ Series Vacuum Degassers that are able to service the needs of any application .It is usually fixed after the shakers. Each degasser effectively and efficiently removes gases from gas-cut mud, thus ensuring that the proper mud weight is pumped down hole. In doing so, the degassers
s are able to aid in the prevention of potential blowouts. Unlike the traditional vacuum degasser, GNCQ vacuum degasser is a self-contained unit. The gas-cut mud is drawn into the degasser by a vacuum created by a regenerative vacuum without needing centrifugal pump .Moreover, GN degasser can act as a big agitator for the drilling mud, which helps the treatment for desander and desilter. GN also have Atmospheric/Centrifugal Degasser available as an alternative to the standard vacuum type degasser.
GN have around 20 Decanter Centrifuge in stock for sale.
With over 400 decanter centrifuge operation in the world,GN is producting around 150 decanter centrifuge every year.
Introduction of Decanter Centrifuge.
Decanter Centrifuge is a machine for the continuous sedimentation of suspended solids from a liquid by the action of centrifugal force in an elongated rotating bowl.Continuous unloading of solids from the centrifuge bowl is made possible by a conveyor which rotates in the same direction as the bowl but at a slightly different speed.
PRINCIPLE COMPONENTS for Decanter Centrifuge.
1.Centrifuge Bowl (or drum)
2. Centrifuge Conveyor (or scroll)
3. Gearbox
4. Frame and collecting vessel
5. Feed inlet and distribution
The desander should take suction from the degasser overflow tank and overflow to the adjacent downstream tank. Desilter suction should be from the desander overflow and again, overflow to the adjacent downstream tank.
Low level equalizers between the overflow and suction tanks ensure a backflow of mud as described above.Where the bottom of the cones lies several feet above the mud level in the tanks, the overflow line may create a vacuum which sucks solids through the overflows, thereby reducing separation efficiency. This can be overcome by installation of a vacuum break.Both desander and desilter shall installed on the mud tank.
GN Mud Cleaner is a desander and desilter mounted over fine mesh shale shaker
The Mud Cleaner is For use in weighted and / or expensive fluid systems
Discards drilled solids while retaining expensive barite, chemicals and liquids in the
fluid system,
The advantage of GN Mud Cleaner is that we use PU material cones which gives you very longer life and our desilter cones is completed with Stainless Steel ball valve for control which helps customer easier for maintainence.