mud cleaner

With more and more cooperation between
China government and Russia Government, there also more and more cooperation
between China companies and Russia companies. As China leading manufactures in
China, GN Solids Control Ltd have more and more development in Russia.

Now the world economic environment is not
good, industry companies becomes more and more difficult under this conditions.
Many companies, even many big and famous companies and cannot survive at the
bad condition. But GN Solids Control can keep improving and developing. With
the advanced design equipment, reliable and fast services, and international
services net, GN Solids Control get more and more marketing share from the
international market.  

Recently, 4 sets solids control shale
shaker
as well as 4 sets solids control mud cleaner dispatched to the port for
Russia clients.

It is not the first time the clients buy
from GN Solids Control Company. But GN Solids Control is the first suppliers
for this client from China. Before buy the solids control equipment from China,
the clients only buy big equipment from America and European.

Why the client finally decided to buy from
GN Solids Control

1) GN Solids Control is China leading
manufacturer for mud solids control and drilling waste treatment system

2) GN Solids Control is China leading
company for drilling waste treatment system. GN engineering group have good
expericent on the drilling waste management field

3) GN Solids Control prompt response to
clients. The client oriented services.

4) Advanced and user friendly design on the
solids control and drilling waste treatment systems.

5) Cost-effective price. GN only make top
quality products and offered with reasonable price. Clients will follow GN after the first
deal, they will give repeat orders and recommend new customers to GN Solids
Control company.

6) One top service and turn key solution:
from solids control linermotion shale shaker, mud cleaner, desander, desilter,
mud mixing system, variable pumps, mud agitators, mud guns, mud tanks,
electrical control systems, decanter centrifuge, vertical cuttings dryer…

GN 500 GPM mud recycling system is one of
the most hot sale system model for horizontal drilling directional drilling (HDD),
water well drilling, CBM drilling, as well as for some small workover rigs.

Water well drilling is very important; it
is not only used for human being life and industry purpose. For oil and gas
drilling field, it is also very important. Before start the operation of oil
drilling, the jobsite need to drill water well. As all the drilling activities
need to use water. They have to ensure water supplier before start drilling oil
and gas well.

One set trailer mounted GN 500 GPM mud cleaning system arrive client job site and highly commended by the clients.
The GN 500 GPM mud recycling system is designed for 1000m deep water well
drilling. It can also suit for 350hp drilling rigs and ZJ20, ZJ30 drilling
rigs.

It is a complete mud system including mud
treatment system and mud mxing system, as well as electric control system. GN
reserves a spare connect on the inlet and outlet pipe of the mixing pump. The
system can be used to mix mud in outside tanks, and it can transfer qualified
mud to outside tanks. Clients can connect the outside storage tank directly.  

The GN 500 GPM mud system is a customized
system per clients’ request. The system is including following equipment.

1) Solids Control shale shaker, model GNZS703E.
It is a linear motion shale shaker with 3-panel. Its capacity is 500GPM.

2) Mud cleaner GNZJ703E-D8N.It is a
combination of shale shaker and desilter cleaner.

3) Mud mixing system

4) Mud tank and accessories.

Besides this proposal, GN Solids Control
offers different standard mud system to cater for different jobsite condition.
GN have below standard design for 500gpm mud system:

1) The economic standard GNMS-500B mud
recycling system

2) The normal standard GNMS-500G mud
system.

3) The high standard GNMS-500GL mud system.
Compare with above proposal, this model is equipped with more treatment process
and with a bigger usable tank capacity.

GN company keeps for standard mud system,
welcome you contact GN for inquire.

3 sets GN fast removable mud recycling system for HDD rigs will be dispatched to the client this week. It is customized system for CPP rigs. CPP engineering team visit GN factory and check the system before dispatch and very satisfied. They are happy with the system quality and thanks very much for the continue technical supporting of GN Solids Control for the years. Till now, they have over 35 sets compact mud recycling systems from GN Solids Control. Most of the systems are for 500GPM capacity.

The 3 new systems are customized with 500gpm capacity also, but can up to as 1000GPM mud system capacity when needed.
The 500gpm ~ 1000 GPM mud recycling systems are composed of below equipment:
1) Mud tank 1 ea. The size of the tank is the same with 20ft standard container, and equipped with ISO blocks. Walkways and handrails are all foldable type design for fast movement. During inland shipment, the users no need to remove the walkways and handrails, they only need to take off the pin shaft and supporting beam of walkway, and fold up the walkway and handrails to the tank side wall.
2) Mud cleaner desander (model GNZS706E-2S) with double deck shale shaker. It is the combination of a double deck shale shaker and 2 each 10’’ desander cones. The bottom shaker deck can be used as solids control shale shaker for preseparation.
3) Mud desilter cleaner (model GNZS706E-8N) with a double deck shale shaker underneath. The bottom deck of the shaker will be used as solids control shale shaker.
The 1 ea desander mud cleaner and 1 ea desilter mud cleaner are mounted in a lifting frame, they can be moved as a compete part during shipment when needed.
4) Feeding pump for desander and desilter cones are mounted in the slope of the mud tank for a compact design.  
For other sizes of GN mud recycling system for HDD rigs, please you visit GN website or contact GN company for details.

Linear motion shale shaker is the first step solids control equipment, and it is the base separation machine for oil and gas drilling rigs.
Shale shaker is a D100 separation machine. D100 means 100% separation. The particles over the separation point can be fully removed after going through the shale shaker screens.
Shale shakers will be placed on Sand trap Tank. In the normal conditions, clean mud from shale shaker will fall down to the sand trap tank. We also call it shale shaker tank or shaker tank.

But in some cases, the operators may need to bypass the shaker tank (sand trap) and direct the drilling fluid to other tanks, then they need to use these side charges. Otherwise operator is not able to bypass sand trap. Most shale shaker are discharge the drilling fluids from shaker deck bottom, so what should they do in this condition? GN Solids Control company offer you the solutions.
GN Solids Control latest design shale shaker is equipped with a sump for dual functions. Operator can choose to let the drilling fluids fall down to the underneath shaker tank (sand trap). The new design is welcomed by the international market, like USA, Brazil, Russia, Iran, Iraq, Kuwait, Oman, India, Indonesia, Malaysia, Singapore, Egypt, Algeria, Nigeria, Tunisia…
Furthermore, GN patent design offers the shale shaker with a reliable performance and much more user-friendly for operators. Below are parts of GN patent design shale shaker features:
1) Interchangeable and fast removable sealing rubber for the shaker deck. It is not only offer the better sealing, but also can protect the shaker deck and shaker screen, and extend the lifetime of replacement shaker screen.
2) Synchronous up and down of the shaker deck angle. It means no matter you adjust the angle from which size, both sides shaker deck angles will be up and down with exactly the same degree.

500GPM is the most popular capacity mud system for HDD, CBM and other trenchless activities. GN Solids Control dispatched a 500GPM mud system to clients.
Firstly, remove the shaker box locking device of shale shaker GNZS703E-HB and mud cleaner GNZJ703E-D8N (Please refer shaker user manual and mud cleaner user manual for detailed operation). Then have a trial operation to shale shaker and mud cleaner.
All valves for pipelines are on off state after dispatch from the manufacturer’s factory. Before start up the system, operator should open values first and ensure all of them unblocked.

Then, start up shale shaker GNZS703E-HB and mud cleaner GNZJ703E-D8N. After the shaker and mud cleaner is running stably, start up submersible slurry pump to feed for the shale shaker. It is the first stage separation. When the mud reaches to three quarters of the 1# compartment underneath shale shaker (about 1 minute), start up the desilter feeding pump (1# sand pump GNSB6x5A-12J). Mud will be transferred to the mud cleaner 4’’ desilter cyclone from the 1﹟compartment, at a pressure of 0.25~0.40MPa. It is the
second stage separation. The clean mud from 4’’ desilter cone flow to the #2 compartment. When the mud height reaches to the overflow pipeline, it will overflow to #3 compartment. The user-owned mud pump is connected to the suction line of the 500GPM mud system tank and transfer qualified mud to wellhead. The clean mud can also directly flow to outside storage tank through the desilter output pipe.
When needed, users can start up the mixing pump (2# sand pump GNSB6x5A-12J) and feed to the mixing hopper GNSLS35A. The weighted mud from mixing hopper flows to 3# compartment. The suction port and discharge port of mixing pump are equipped with T-pipe, it can also mixing/discharge mud from/to outside tanks.  
Pay attention to the performance of the desilter cyclone. Ensure it works properly. If not, adjust the cyclone adjustment cap for a better performance. Pay attention to the figures on the pressure gauge of desilter cyclone, ensure it is under the scope of the working pressure. The working pressure of 4’’ desilter cyclone is 0.25~0.40MPa.