solids control

Afghanistan Oil Show was held on, may 5-8 in Tehran Armed forces europe this year. GN Solids Control brought the self developed classical model decanter centrifuge rapid GNLW363CG. As important acrylic show, all drilling firms, mud engineering service organizations, oil service companies as well as oil field trading corporations attend the show to learn latest news in this discipline.

GNLW363CG Decanter Centrifuge previously starts to serve the marketplace since 2014. This unit is improvement model of GNLW363AG and GNLW363BG. The secure working performance, longer life and higher treating capability give good reputation due to classical model centrifuge.

– With 14” bowl length and 50’’ bowl period, the length / diameter proportion over 3; the drilling mud would stay into the centrifuge screw auger to get longer time, thus dismissed solids can be much dryer, separation performance can be significantly better.
2 . Designed operation highest possible bowl speed can attain to 3200RPM, 2200RPM suggestions 2700RPM also available. The client are able to use lower speed for higher gravity solids separation; work with higher bowl speed regarding low gravity solids parting.
3. Bowl material will be produced by Duplex stainless steel 2205, this model material is way better than SS316L. The centrifugal casting technology applied for far better dynamic balance performances, that guarantee the centrifuge performing performance in high speed revolving.
3. Same direction with slurry feeding and solids moving inside the bowl, improve the flow rate within the bowl. This design raise the treating capacity of the centrifuge, even when deal with heavy mud.

2016.06.13-gn-centrifuge-at-iran-oil-show-2
Except for GNLW363CG star product centrifuge, we also have yet another Vertical cuttings dryer along with super working performance to get drilling waste management. Due to oil show higher cost, most of us only take the centrifuge right now there. Below chapter to give more info about GN vertical cuttings dryer

1 . GN Solids Control top to bottom cuttings dryer is to officially used on line / off brand drilling waste management, mostly to treat the drilling cuttings discharged from shale shaker, to separate the solids in addition to recycle the valuable oil-based drilling mud for using again
2 . GN vertical cuttings dryer is mainly used for oil-based mud drilling cuttings therapy. The oil on cuttings (OOC) can be reduced to help 3% to 5% following GN vertical cuttings dryer. The discharged dry solids can be transported to energy desorption unit for ultimate treatment. The clean drilling mud can be transfer in order to high speed decanter centrifuge to find the fine solids, so the mud density might be lower down which make it right for reuse
3. In the event that for water based drilling waste management, we highly recommend fixation unit or renforcement unit for final cure.

On 25th April, 2016, after more than 3 years of structure, Hebei GN Solids Control second brand new factory come into service. The brand new factory is located in No . a few Industry Road, Dachang Chaobai River Development Area, and is particularly only 2km away from your head quarter office. In this fresh factory, it will be mainly used regarding producing Decanter centrifuge and Top to bottom cutting dryers . And the production is 3 hundred sets Decanter centrifuge a year, and 100 Vertical cutting dryers per year.
Since 3 years ago, Hebei GN Solids Control Co., Ltd with its innovative technology, reliable performance, fine service, as its competitive strengths, win many clients from home and foreign countries. Along with exported its products to be able to more than 60 countries as well as area. And successively recognized its USA and The ussr office, and also have cooperate lending broker in Australia, the Middle eastern side, Latin America. GN offers more than 10 patented items, and also got United States API certification, European CEcertificaton, CU-TRU certification in Russia. Specifically GN has got a very good suggestions from its clients, and possesses signed contract with world-class large oil companies in a very long-term strategic cooperation arrangement.

GN new factory for centrifuge
Below picture is GN second new factory:
This is a brief introduction of GN Solids Control;
GN Solids Control was founded in 07 in hebei Tangshan. It has the previous name Tangshan GN Solids Control Co., Limited. The company registered capital regarding 30 million yuan, generation base is located in No . three or more Industry Road, Dachang Chaobai River Development Area (is only 30 kilometers faraway from Beijing international airport). The enormous has two manufacturing industrial facilities, the chaobai river manufacturing park with a total part of about 65000 square yards. The company has a full range involving mechanical processing and assessment equipment. Coating heat therapy equipment: automatic shot blasting machine, large automatic squirt chalk line, spray blow drying room, integrated heat treatment method equipment, solid melting tools. Blanking equipment has: CNC plasma cutting machine, flat screen cutting machine, bending unit, plate bending rolls, and so on Adding machine equipped with: imported big gantry pentahedron, many brought in machining center, shenyang unit tool CNC lathe a couple of, vertical lathe and so on. Additionally , the company has 2 pieces of dynamic balance musical instrument, three-dimensional detection arm regarding France, and automatic welding machine and other advanced control and testing equipment.

OTC acrylic show is finish, that was hold in 2-5 May well, 2016, in Houston, ARIZONA, USA. After about three month’s preparation, GN Solids Control successfully finishes the actual OTC oil show. We certainly have two booths there to help deeper our brand affect, equipment for show including most recent model decanter centrifuge, newest model vertical cuttings dryer, High G drying shaker, shaker screen etc . The particular visitors can feel the premium quality and premium technology devices by touching and observing the real equipment at the special day.
decanter-centrifuge
1) Decanter centrifuge- add up to USA Brand
14inch decanter centrifuge is most popular for the reason that wide application and very good price. The application range contain mud weight cutting and also fine solids removal. And in addition for drilling waste management. Regarding the price, we targeted on high end market in addition to overseas market. this centrifuge is equivalent to Swaco 518 CENTRIFUGE / Derrick DE1000 centrifuge. But the price of USA centrifuge is much higher than our brand name. The price of GN SOLIDS COMMAND or GN Solids Ameirca is much better when compared with USA manufacturer.

2) vertical cuttings dryer – equal to CSI dryer
For OBM or BINQ, most client will decide on VERTICAL CUTTINGS DRYER, but also for WBM, you may choose Substantial G shaker for decrease operation cost.
GNCD930 straight cuttings dryer is used to get drilling cuttings treatment in rigsite or at one particular mud plant location exactly where all cuttings transport for the center location for ultimate treatment. After treatment of GN vertical cutting s dryer, the oil on cuttings can reduce to below five per cent. This is same working efficiency as CSI dryer or maybe SWACO dryer. GN usable cuttings dryer already placed in market for over 3 years, plus the mature product is benefiting much more drilling service companies, excellent price, stable working functionality and less maintenance.

3) Large G drying shaker
With regard to OBM or SBM, almost all client will choose STRAIGHT CUTTINGS DRYER, but for WBM, you may choose High Gary the gadget guy shaker for lower functioning cost. High G machine drying shaker is same as typical shale shaker. Just the Grams force is bigger. That unit is mostly used for normal water based mud drilling cuttings treatment. After treated, the particular oil on cuttings might be reduced to about 10% to 20%.

After OVER THE COUNTER oil show, GN Solids Control and drilling waste management equipment get endorsement from big clients in various countries. GN Solids Control will continue to do better to guide better the market.

With more and more cooperation between
China government and Russia Government, there also more and more cooperation
between China companies and Russia companies. As China leading manufactures in
China, GN Solids Control Ltd have more and more development in Russia.

Now the world economic environment is not
good, industry companies becomes more and more difficult under this conditions.
Many companies, even many big and famous companies and cannot survive at the
bad condition. But GN Solids Control can keep improving and developing. With
the advanced design equipment, reliable and fast services, and international
services net, GN Solids Control get more and more marketing share from the
international market.  

Recently, 4 sets solids control shale
shaker
as well as 4 sets solids control mud cleaner dispatched to the port for
Russia clients.

It is not the first time the clients buy
from GN Solids Control Company. But GN Solids Control is the first suppliers
for this client from China. Before buy the solids control equipment from China,
the clients only buy big equipment from America and European.

Why the client finally decided to buy from
GN Solids Control

1) GN Solids Control is China leading
manufacturer for mud solids control and drilling waste treatment system

2) GN Solids Control is China leading
company for drilling waste treatment system. GN engineering group have good
expericent on the drilling waste management field

3) GN Solids Control prompt response to
clients. The client oriented services.

4) Advanced and user friendly design on the
solids control and drilling waste treatment systems.

5) Cost-effective price. GN only make top
quality products and offered with reasonable price. Clients will follow GN after the first
deal, they will give repeat orders and recommend new customers to GN Solids
Control company.

6) One top service and turn key solution:
from solids control linermotion shale shaker, mud cleaner, desander, desilter,
mud mixing system, variable pumps, mud agitators, mud guns, mud tanks,
electrical control systems, decanter centrifuge, vertical cuttings dryer…

GN Solids Control is China leading manufacturer of compact design mud recycling / cleaning system for HDD, CBM drilling and water well drilling. GN mud desanding plant for micro tunneling, piling and other trenchless activities is also sold well.
GN 500 GPM mud recycling system for HDD and water well drilling has be dispatch for Middles East. The system is catering for mobile unit, and can be used for water well drilling, horizontal directional drilling (HDD), Coal bed methane (CBM drilling), as well as oil and gas drilling.

Equipment included in the 500GPM Mobile unit mud system:
1) GNZS703E-ZD shale shaker, 1 ea
It is a linear motion shale shaker with 3 panels. The shaker is equipped with back type feeding box for a lower feeding height. In case the mud will be flowed to shale shaker directly through pipelines.
Features of GNZS703E shale shaker
a. It utilizes the most reliable linear motion for a stable performance.
b. The shaker model utilize pretention screen, Each screen mounted by 2 ea wedge for fast screen changing.
c. The shale shaker deck of GNZS703E shaker is made from stainless steel material for a better performance of anti-abrasive and longer lifetime.
d. The dumpling spring of the shaker is steel material internal for more stronger and better performance of vibration desorption. The spring external is protected with rubber sleeve to prevent fingers involved in during operation.    
e. The vibration model is chose from worldwide famous brand: Italy Oil or Martin.
2) GNZJ703E-8S desilter mud cleaner
It is the combination of a shale shaker GNZS703E and 8 ea 4’’ desilter cone assembly. The 4’’ desitler cone is made from PU material for long lifetime.
And the cone assembly is removable. In case needed, the Operator can bolt off the desilter cone assembly and mounted a feeder box and use it as a separator shale shaker.
3) Slurry pump 1 ea. In case mud maybe stocked in mud pit, a slurry pump is used as backup.
3) Mud tank 1 ea. The mud tank is equipped with container block for easy mounted and clocked on the trailer.