oil and gas

With more and more cooperation between
China government and Russia Government, there also more and more cooperation
between China companies and Russia companies. As China leading manufactures in
China, GN Solids Control Ltd have more and more development in Russia.

Now the world economic environment is not
good, industry companies becomes more and more difficult under this conditions.
Many companies, even many big and famous companies and cannot survive at the
bad condition. But GN Solids Control can keep improving and developing. With
the advanced design equipment, reliable and fast services, and international
services net, GN Solids Control get more and more marketing share from the
international market.  

Recently, 4 sets solids control shale
shaker
as well as 4 sets solids control mud cleaner dispatched to the port for
Russia clients.

It is not the first time the clients buy
from GN Solids Control Company. But GN Solids Control is the first suppliers
for this client from China. Before buy the solids control equipment from China,
the clients only buy big equipment from America and European.

Why the client finally decided to buy from
GN Solids Control

1) GN Solids Control is China leading
manufacturer for mud solids control and drilling waste treatment system

2) GN Solids Control is China leading
company for drilling waste treatment system. GN engineering group have good
expericent on the drilling waste management field

3) GN Solids Control prompt response to
clients. The client oriented services.

4) Advanced and user friendly design on the
solids control and drilling waste treatment systems.

5) Cost-effective price. GN only make top
quality products and offered with reasonable price. Clients will follow GN after the first
deal, they will give repeat orders and recommend new customers to GN Solids
Control company.

6) One top service and turn key solution:
from solids control linermotion shale shaker, mud cleaner, desander, desilter,
mud mixing system, variable pumps, mud agitators, mud guns, mud tanks,
electrical control systems, decanter centrifuge, vertical cuttings dryer…

GN 500 GPM mud recycling system is one of
the most hot sale system model for horizontal drilling directional drilling (HDD),
water well drilling, CBM drilling, as well as for some small workover rigs.

Water well drilling is very important; it
is not only used for human being life and industry purpose. For oil and gas
drilling field, it is also very important. Before start the operation of oil
drilling, the jobsite need to drill water well. As all the drilling activities
need to use water. They have to ensure water supplier before start drilling oil
and gas well.

One set trailer mounted GN 500 GPM mud cleaning system arrive client job site and highly commended by the clients.
The GN 500 GPM mud recycling system is designed for 1000m deep water well
drilling. It can also suit for 350hp drilling rigs and ZJ20, ZJ30 drilling
rigs.

It is a complete mud system including mud
treatment system and mud mxing system, as well as electric control system. GN
reserves a spare connect on the inlet and outlet pipe of the mixing pump. The
system can be used to mix mud in outside tanks, and it can transfer qualified
mud to outside tanks. Clients can connect the outside storage tank directly.  

The GN 500 GPM mud system is a customized
system per clients’ request. The system is including following equipment.

1) Solids Control shale shaker, model GNZS703E.
It is a linear motion shale shaker with 3-panel. Its capacity is 500GPM.

2) Mud cleaner GNZJ703E-D8N.It is a
combination of shale shaker and desilter cleaner.

3) Mud mixing system

4) Mud tank and accessories.

Besides this proposal, GN Solids Control
offers different standard mud system to cater for different jobsite condition.
GN have below standard design for 500gpm mud system:

1) The economic standard GNMS-500B mud
recycling system

2) The normal standard GNMS-500G mud
system.

3) The high standard GNMS-500GL mud system.
Compare with above proposal, this model is equipped with more treatment process
and with a bigger usable tank capacity.

GN company keeps for standard mud system,
welcome you contact GN for inquire.

GN Solids America, it is the branch company of GN Solids Control Company Limited. It is located in Houston Texas. With its own office building and warehouse.

GN Solids Control and GN Solids America took part in 2015 OTC oil show with great success. The head company GN Solids Control takes its latest design drilling waste management equipment (high speed decanter centrifuge, vertical cuttings dryer) for the show. And GN Solids America show the mud cleaner separator machine for the OTC oil show. Mud cleaner is a 3-in-1 machine, with the function of desander, desilter, and a under flow shale shaker.

GN solids control mud cleaner for oil and gas drilling showing on OTC
1) Mud cleaner model: GNZJ594E-2S12N
It is the combination of under flow shale shaker GNZS594E, a 2-cone desander, and 12-cone desilter.
2) Capacity of the mud cleaner: 240m3/h (max.)
The capacity of mud cleaner depends on the desander cone and desilter cone capacity. The smaller one is the treating capacity of the whole treating capacity.
Desander cone and desilter cone is on D100 separation machine. There will be some amount of useful mud discharged together with dirty mud. So the function of underflow shale shaker is to further treat and recovery mud and dry the solids discharge.
Some jobsite may use desander or desilter with not under flow shale shaker to save cost. But the performance is surely not as good as the combined one.
3) Feeding pipe size of the mud cleaner is 6’’ and the output size if 8’’. GNSB8*6 centrifugal pump is mostly used to feeding for the desander and desilter.
4) Shaker screen of the GNZJ594E-2S12N mud cleaner: the under flow shale shaker is a 4-panel shaker with long shaker deck. It can make the solids more dryer. The shaker screen is pretention type, and mounted with wedge for fast screen changing.
5) GN patent design for Synchronous adjusting of the deck angle. When the operator adjust shaker angle at any side, both sides will be up or down with exactly the same angle. It saves time of jobsite people and easy for operation.  

500bbls tanks is a common size mud tank for oil and gas drilling rigs. I can be used for mud mixing or mud storage. For HDD or CBM drilling, they normally do not use such big size mud tank.

Below is the parameters of GN design 500bbl mud storage tank, it is rectangular Mud Tank built as per API specification Schedule 40:

Mud tank usable capacity: 500 bbls approx.

Compartment quantity: the 500bbls mud tank can be divided into 1~3 compartments (Depends on customer request.). Capacity of each compartment: 250 bbls approx.

Mud tank dimension W x H x L: 13500×3000 x2650mm Or customized dimension.  

Electrical mud agitator model GNJBQ150-DD, with 36" impeller, 2-layer impeller. 20 HP driving motor, 460V – 60 HZ, RPM 1750 or 380V – 50 HZ, RPM 1450. 

Electrical mud agitator quantity – 2~4 each, with 2~4 each mud gun

Sufficient agitation to mix up 17 ppg mud. Bottom mud guns installed quantity – 4 each. Bottom mud guns installed size 2 in, model GNNJQ50A-3G, 3-nozzle mud gun.  

6" suction and 4" discharge line on either end of the tank with female cam lock connection to other tanks.  4" drain line with butterfly valve – 2, 8" Equalizing valve between compartments- qty 2~3. Depends on compartment quantity.

Cover with Grating top, collapsible hand rails surrounding, dual access- escape ladder

Skid: It is skid Mounted 3 runner oilfield skid mud tank with V crimp walls, it is easy for oilfield movement.

Other advantages of 500bbl mud storage tank for oil and gas drilling

1. Sand Blast Treatment before painting.

2. External paint and internal coating

3. Bottom painting for anticorrosive: Two pack Epoxy zinc, thickness 75 μ

4. Middle painting: Two Pack Epoxy hi-build containing anticorrosive pigmentstwice, thickness 250 μ

5. Surface painting: Surface pigmented with high quality light fast PU pigments, thickness 70 μ

6. Standard: API&ISO Certified Manufacturer

Drill pipe is an industrial tubular used to drill into the ground. There are three major industries that use drill pipe. The most common application of drill pipe is in the oil and gas drilling. Another industry that uses drill pipe is the underground construction industry, or more specifically, the Horizontal Directional Drilling (HDD) industry. And finally, the water well drilling industry also uses drill pipe.

The oil and gas industry is where drill pipe is used the most. Another industry that uses drill pipe is the underground construction industry, or more specifically, the Horizontal Directional Drilling (HDD) industry. This industry utilizes drill pipe to bore tunnels underneath waterways, major roadways, and generally any place where trenching is not acceptable. The resulting bore is used for various utility pipelines such as: fiber optic, water, electricity, and oil and gas. HDD drilling rigs are very different from oilfield drilling rigs in that they are almost completely laying flat or horizontal. Most of the larger (Maxi) HDD rigs use exactly the same drill pipe that the oilfield uses.

HDD drill pipe have a variety of models. Different brand HDD machine have different drill pipe standard.  Usually, the length and thickness of the dill pipe are similar, but the thread of the connector are different.

Vermeer and Ditch Witch are the most 2 famous manufacturer for HDD drill pipe, while GN Solids Control is the most professional for HDD mud recycling system.