decanter centrifuge

Cuttings
Box Used on Drilling Site

Cuttings box is also called cuttings collection box
that is widely used on drilling site as a temporary vessel to collect and store
the drilling waste cuttings. Due to the purpose of the cuttings box, it is
designed compact and easy for transportation. Once the cuttings box is full, it
could be replaced by an empty one.

The cuttings box is always used on the drilling
site where the mud pit is not available. In the solids control system, the cuttings boxes are always located under the solids discharge
chute of the shale shaker to collect the cuttings out of the primary shaker.
Same situation as the cuttings box located with the de-sander, de-silter and decanter centrifuge.

Most of the cuttings boxes are simple without a
cover. And if you want move it, you need be careful as the cuttings still with
large content liquid will splash out. With consideration on this, GN Solids
Control designed a type waste cuttings box with a fully sealed cover on it.
When collecting the cutting, the cover is open; when transportation, the cover
is locked easily to prevent the splashing of the cuttings. It is an ideal
container to meet the requirements of HSE regulations for hazardous waste
movement. Not only for waste cuttings, also for some other hazardous waste
discharges. At the bottom frame of GN’s cuttings box, the forklift loading
grooves are designed for easy moving and replacing.

The advantage to use cutting box is no need dig a
mud pit on the ground, then the pitless mud recycling system as well as waste cuttings management system are realized. Fully covered box could be transported safely and easily
for waste management plant where the waste would be further treated. The disadvantage
is you may need many cuttings box stock on drilling site so that you could
replace a full one immediately. The cutting boxes everywhere would occupy much
area of the site.

The
ondrilling lower price of unsavory oil doesn’t hold the stage of oil and gas
market, because the crude oil and gas is always needed by the modern-day world,
the oil and gas associated companies still have to work around the oil and gas
exploring and drilling, just try to reach this at a lower cost. That’s why
inside the coming Oil Show to become held in April in The ussr, Chinese brands
become more plus much more popular.

But the oil firms don’t want to sacrifice the standard although on a much lower
cost, and accordingly, the most least expensive solutions become their precious
choice. GN Solids Control, who
produces and provides the particular internationally best quality of products
at a reasonable made in China value, becomes the best choice of the drilling
companies and oil provider companies.
This time, for the Moscow oil show 2016 that is scheduled in April, GN will
bring the most updated GNLW363CG Decanter
centrifuge
and GNZS594E shale shaker to the necessary oil show, and also
its sturdy and effective screens.
GN has attended Moscow necessary oil show for several years. Each year, GN
brought the newest designed goods to the clients, and GN sales team supported
lots of Russian language companies. GN produces are usually certified by
Russian TP & TC, welcomed by simply Russian market.
Main components of GNLW363CG:
Bowl height 14 inch.
Bowl span: 50 inch.
Max velocity: 3900RPM
Typical speed: 3200RPM.
Typical G force 2062

Main factors of GNZS594E drying
shaker
:
Linear motional.
616 RPM treating capability.
Vibration G force as much as 8. 0.
Screen sizing 1165*585MM
Screen area: installment payments on your 73 sqm

If you have prefer to go to Moscow oil present, pls contact us and verify a
time for meeting, And also GN has office within Moscow for your easy speak to
at any time. 

China
and taiwan traditional new year will come in February. 2016. In order to thanks
all of GN clients’ support in days gone by year, GN Solids Control offered big
discount on sale for GN drilling
waste materials management equipment
. The big discounted for sale activity
will last for the complete Jan.
Drilling waste products GN company offer significant discount for sale in Jan.
2016:

1) Vertical
cuttings dryer GNCD930C
and GNCD930C-VFD. Its mainly used to treat the
oil-based drilling cuttings (OBM). Functionality is very good. The Straight
cuttings dryer can reduce the particular oil on cuttings to be able to 3% ~ 5%.
Soon after VG dryer, the reliable discharged is very dry. Its easy for movement
by vehicle. In some countries, it can be cleared directly with such very low
OOC. If not, it can be eliminated to treat by thermal desorption unit.
2) High H dryer (also called substantial G drying shaker). The item utilizes
high G drive reach to 8. 0G in order to dryer the cuttings. Substantial G
drying shaker is principally used to separate water basic mud cuttings. Water
bottom mud is more difficult intended for separation. The main problem to
manage WBM with VG dryer is that, the mud may block the screen holder, then it
cannot distinct any mud any more. Large G dryer shaker may also be used to
treat oil base mud. But it can only reduce acrylic on cuttings to 15 ~ 15%, it
is not sufficient.

3) High speed
decanter centrifuge GNLW363C
and GNLW363C-VFD. It really is 14 inch
decanter centrifuge. 14’’ is the most popular dimension centrifuge used in oil
and gas drilling field. Client can choose permanent speed control or changing
frequency control. For the VFD control, GN offers PLC touch screen for sensible
control.
4) Big dish decanter centrifuge GNLW553C-VFD. This can be a big bowl big level
decanter centrifuge. It is which has a 22 inch bowl. It’s the biggest size from GN Solids Control. It can be useful
for waste management, for mud solids control, as well as chemical substance
dosing system (dewatering unit).
5) Screw conveyer. GN offers different diameter and various length screw
conveyer to get drilling cuttings transfer. The actual auger diameter do GN
Solids Control offer: 10’’, 12’’, 14’’, 16’’, in addition to 18’’. GN make 10
ft as standard the design of each section. Clients can make 1 ~ 4 areas for 12
ft, twenty four ft, 36 ft, along with 48 ft. Clients can help to eliminate or
extend the length from jobsite when need. 

Linear motion shale shaker is the first step solids control equipment, and it is the base separation machine for oil and gas drilling rigs.
Shale shaker is a D100 separation machine. D100 means 100% separation. The particles over the separation point can be fully removed after going through the shale shaker screens.
Shale shakers will be placed on Sand trap Tank. In the normal conditions, clean mud from shale shaker will fall down to the sand trap tank. We also call it shale shaker tank or shaker tank.

But in some cases, the operators may need to bypass the shaker tank (sand trap) and direct the drilling fluid to other tanks, then they need to use these side charges. Otherwise operator is not able to bypass sand trap. Most shale shaker are discharge the drilling fluids from shaker deck bottom, so what should they do in this condition? GN Solids Control company offer you the solutions.
GN Solids Control latest design shale shaker is equipped with a sump for dual functions. Operator can choose to let the drilling fluids fall down to the underneath shaker tank (sand trap). The new design is welcomed by the international market, like USA, Brazil, Russia, Iran, Iraq, Kuwait, Oman, India, Indonesia, Malaysia, Singapore, Egypt, Algeria, Nigeria, Tunisia…
Furthermore, GN patent design offers the shale shaker with a reliable performance and much more user-friendly for operators. Below are parts of GN patent design shale shaker features:
1) Interchangeable and fast removable sealing rubber for the shaker deck. It is not only offer the better sealing, but also can protect the shaker deck and shaker screen, and extend the lifetime of replacement shaker screen.
2) Synchronous up and down of the shaker deck angle. It means no matter you adjust the angle from which size, both sides shaker deck angles will be up and down with exactly the same degree.

China traditional new year will come in Feb. 2016. In order to thanks all GN clients’ support in the past year, GN Solids Control offered big discount for sale for GN drilling waste management equipment. The big discount for sale activity will last for the whole Jan.
Drilling waste equipment GN company offer big discount for sale in Jan. 2016:
1) Vertical cuttings dryer GNCD930C and GNCD930C-VFD. It is mainly used to treat the oil based drilling cuttings (OBM). Performance is very good. The Vertical cuttings dryer can reduce the oil on cuttings to 3% ~ 5%. After VG dryer, the solid discharged is very dry. It is easy for movement by truck. In some countries, it can be discharged directly with such low OOC. If not, it can be removed to treat by thermal desorption unit. 

2) High G dryer (also called high G drying shaker). It utilizes high G force reach to 8.0G to dryer the cuttings. High G drying shaker is mainly used to separate water base mud cuttings. Water base mud is more difficult for separation. The main problem to treat WBM with VG dryer is that, the mud will block the screen basket, then it cannot separate any mud any more. High G dryer shaker can also be used to treat oil base mud. But it can only reduce oil on cuttings to 10 ~ 15%, it is not enough.
3) High speed decanter centrifuge GNLW363C and GNLW363C-VFD. It is 14 inch decanter centrifuge. 14’’ is the most popular size centrifuge used in oil and gas drilling field. Client can choose fixed speed control or variable frequency control. For the VFD control, GN offers PLC touch screen for smart control.
4) Big bowl decanter centrifuge GNLW553C-VFD. It is a big bowl big volume decanter centrifuge. It is with a 22 inch bowl. It is the biggest size from GN Solids Control. It can be used for waste management, for mud solids control, as well as chemical dosing system (dewatering unit).
5) Screw conveyer. GN offers different diameter and different length screw conveyer for drilling cuttings transfer. The auger diameter do GN Solids Control offer: 10’’, 12’’, 14’’, 16’’, and 18’’. GN make 12 ft as standard design for each section. Clients can choose 1 ~ 4 sections for 12 ft, 24 ft, 36 ft, and 48 ft. Clients can reduce or extend the length at jobsite when need.